Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses. Use online scanners here and here to upload downloaded attachment to check for safety.
Posted: Fri Aug 11, 2017 5:32 am Post subject: Refer to Document IITK GSDMA -EQ22-V3.0
This document is available on net if you search it. At page number 12 column 1 above drawing of beam detail spacing of stirrups is calculated as d/2= 532/2 = 266. in refrence to clause 6.3.5 of IS 13920. for mid span of beam. But in the same page column 2 of page 6th line above drawing/ fig " Elsewhere provide stirrups @ 165mm c/c ." I am confused why it is 165mm ?. I am not able to figure this out pls help.
Rgards all sefians
Er. Man Chand
It was already mentioned that the minimum reinforcement as per SP-16 at center is given as 165 mm c/c. and it was found out that the maximum spacing can be : (d/2 = 266 mm) as per IS:13920 . Then, they have found out that the spacing of stirrups at the ends as: 125 mm c/c using the IS:13920. Now, the statement "Elsewhere, provide stirrups at 165 mm centers" means that the except at distance of '2d' from both ends, the stirrup spacing should be 165 mm as per calculated from SP-16.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum