www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

shear stress in bolts

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI Web Site Problems/ Login/Registration Issues
View previous topic :: View next topic  
Author Message
A B Malla
General Sponsor
General Sponsor


Joined: 26 Mar 2017
Posts: 13

PostPosted: Mon Sep 16, 2019 8:56 am    Post subject: shear stress in bolts Reply with quote

Dear Sefians,

I would like to know the difference in Permissible Stresses of Bolts considered in Table 8.1 of IS:800-1984 & Table 1 of IS 802 ( Part l/Set 2 ) : 1992, since both these tables show different values. kindly share your expertise.

PFA Tables for reference.


Regards,
A. B Malla
Back to top
View user's profile Send private message
Dr. N. Subramanian
General Sponsor
General Sponsor


Joined: 21 Feb 2008
Posts: 5553
Location: Gaithersburg, MD, U.S.A.

PostPosted: Tue Sep 17, 2019 3:56 am    Post subject: Re: shear stress in bolts Reply with quote

Dear Er Malla

IS 800:1984 is in Working stress format(we have to now use IS 800:2007 only) and IS 802 table shows ultimate stress. Hence the difference. It is better now to use the values given in IS 800:2007

Best wishes
NS

Abrar wrote:
Dear Sefians,

I would like to know the difference in Permissible Stresses of Bolts considered in Table 8.1 of IS:800-1984 & Table 1 of IS 802 ( Part l/Set 2 ) : 1992, since both these tables show different values. kindly share your expertise.

PFA Tables for reference.


Regards,
A. B Malla
Back to top
View user's profile Send private message
A B Malla
General Sponsor
General Sponsor


Joined: 26 Mar 2017
Posts: 13

PostPosted: Tue Sep 17, 2019 4:47 am    Post subject: Reply with quote

Dear sir,

it is as per contract requirement to use IS 800 :1984, since the project is old & is still going.

1. IS 802:1992, it is observed permissible shear stress in 4.6 grade bolts is 218 Mpa, while for same grade of bolt permissible stress is 80 Mpa in IS 800:1984.

2. I presume both IS 800 & 802 are working stress please clarify.

3. while designing bolts for tower, which stress is to be considered.
(In Transmission line structures by S.S Muthy & A.R Santhakumar, IS:800:1984 table is mentioned).

i'm delighted to see the reply is coming from author of the book, which i was referring to in my UG & PG . Thanks to SEFI.

Regards A.B Malla
Back to top
View user's profile Send private message
Dr. N. Subramanian
General Sponsor
General Sponsor


Joined: 21 Feb 2008
Posts: 5553
Location: Gaithersburg, MD, U.S.A.

PostPosted: Wed Sep 18, 2019 6:52 pm    Post subject: Reply with quote

Dear Er Malla,

Please note that while IS 800:1984 is based on working stress method, IS 802: 1995 is based on Ultimate load concept- See Back of Front Cover of IS 802(Part 1/Sec 1): 1995. Hence there should not be any confusion, though it is not stated clearly in IS 802(Part 1/Sec 2) of the code.

Perhaps this code (IS 802) will also be revised based on IS 800:2007 soon.

Good to know that you referred my book in UG and PG. All the best.

Regards,
NS
A B Malla wrote:
Dear sir,

it is as per contract requirement to use IS 800 :1984, since the project is old & is still going.

1. IS 802:1992, it is observed permissible shear stress in 4.6 grade bolts is 218 Mpa, while for same grade of bolt permissible stress is 80 Mpa in IS 800:1984.

2. I presume both IS 800 & 802 are working stress please clarify.

3. while designing bolts for tower, which stress is to be considered.
(In Transmission line structures by S.S Muthy & A.R Santhakumar, IS:800:1984 table is mentioned).

i'm delighted to see the reply is coming from author of the book, which i was referring to in my UG & PG . Thanks to SEFI.

Regards A.B Malla
Back to top
View user's profile Send private message
A B Malla
General Sponsor
General Sponsor


Joined: 26 Mar 2017
Posts: 13

PostPosted: Sat Sep 21, 2019 4:21 am    Post subject: shear stress in bolts Reply with quote

Dear N S Sir,

Thank you very much for your valuable time from your busy schedule. Such efforts from your side benefits all of us.


Regards,
A B Malla
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI Web Site Problems/ Login/Registration Issues All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy