|
View previous topic :: View next topic |
Author |
Message |
s_saranya SEFI Member
Joined: 23 Oct 2020 Posts: 6
|
Posted: Fri Apr 23, 2021 6:27 am Post subject: Time period, Perform 3D |
|
|
Hello every one,
The fundamental time period should be same in SAP and Perform 3D?
I got fundamental time period as 0.48s in SAP but in perform 3D it is 0.68s for the same model?
Is it allowed?
If its not, what could be the possible error?
Thank you |
|
Back to top |
|
|
VPandya General Sponsor
Joined: 09 Nov 2009 Posts: 842
|
Posted: Wed Apr 28, 2021 4:45 am Post subject: PLOT MODE DEFLECTED SHAPE . MAKE SURE INPUT PROPERTIES ARE SAME . |
|
|
Dear Er. S_saranya,
Fundamental Period is the basic dynamic property of any Structure . You can have only one correct number ( ANSWER ) , no matter what software you are using . PLOT THE DEFLECTED SHAPE OF THE MODE YOU ARE CALLING FUNDAMENTAL MODE. That can tell you if you are getting Fundamental Mode shape in both cases .
SIMPLY STATED ONE ANSWER IS RIGHT AND OTHER WRONG . PLOT THE DEFLECTED SHAE OF WHAT YOU CALL FUNDAMENTAL MODE . IT IS EASY TO CATCH . Make sure all your input properties ( INPUT FILES ) are same in both cases .
FUNDAMENTAL MODE IS USUALLY A VERTICAL CANTLEVER BEAM DEFLECTED SHAPE FOR HIGH RISE BUILDINGS .
Regards.
Vasudeo Pandya P.E.
Structural Engineer |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|
|