Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses. Use online scanners here and here to upload downloaded attachment to check for safety.
Posted: Thu Mar 15, 2018 7:23 am Post subject: Chapter 8
8.1.1 for columns eccentricity- Code provision leads to higher eccentricity on longer side. This need to be changed 8.1.2: It should be for all as not only walls but also it's relative location and whether walls are bounded by beams on all sides etc. are important
220.127.116.11.a: Direct load path- Does this mean we need to analyse the tower independent of podium and establish foundations?
Any specific method when flat slabs are employed at podium level?
18.104.22.168.2.b: Need to have a cap on axial load ratio to ensure ductility in the column. Research indicates that level of axial load plays important role
8.5.2.a: Additional criteria of minimum distance from end/ corner to be specified or additional criteria for design of short column is required
8.7.6: Often times, due to torsion in building, axial force in beams exist even under gravity loads. IS IS13920 provision applicable ?Thanks & regards
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum