Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses. Use online scanners here and here to upload downloaded attachment to check for safety.
Posted: Thu May 21, 2020 5:28 am Post subject: Stub length maximum and minimum to be embeded in Pile caps of Transmission line
I have one doubt for a long period about the depth of stub angle to be embeded in concrete.Normal practise it is followed as 150 mm between the PCC and the Stub bottom most portion.(leg shear from Bottom).
Is there any standard reference or by practise any minimum and maximum limits could be followed.
For example if the pile cap thickness is 1350mm and the stub embedded length in the concrete is 900mm only.It can be accepted or any problems will encounter in future.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum