|
View previous topic :: View next topic |
Author |
Message |
manoj_123 General Sponsor
Joined: 31 Aug 2009 Posts: 22
|
Posted: Sun Jan 30, 2011 3:39 pm Post subject: Design of RCC box culvert |
|
|
While designing RCC box culvert, I observe that the provided
reinforcement quantity is much higher than required quantity.
Please guide me to adopt optimum quantity of reinforcement. |
|
Back to top |
|
|
praveen_sefindia SEFI Member
Joined: 21 Jun 2010 Posts: 8
|
Posted: Wed Feb 02, 2011 12:21 pm Post subject: Box Culvert |
|
|
Design of Box Culvert and quantity of rebars varies for 2D or 3D Analysis. It should be analysed for 3D. Moments in Haunches of Box governs its Design. Sufficient thickness of haunches should be provided in order to counteract the highest moments in that portion. |
|
Back to top |
|
|
gpsarathyy ...
Joined: 28 Jun 2010 Posts: 487
|
Posted: Wed Feb 02, 2011 5:30 pm Post subject: |
|
|
Mr. Manoj,
Could you explain your problem in detail, it is not clear.
Regards,
G.Parthasarathy
Chennai
GPSARATHYY@GMAIL.COM |
|
Back to top |
|
|
manoj_123 General Sponsor
Joined: 31 Aug 2009 Posts: 22
|
Posted: Thu Feb 10, 2011 3:31 pm Post subject: box culvert |
|
|
gpsarathyy wrote: | Mr. Manoj,
Could you explain your problem in detail, it is not clear.
Regards,
G.Parthasarathy
Chennai
GPSARATHYY@GMAIL.COM |
Sir,
The box culvert in question is for storm water drainage purpose with depth upto 2 m and width 1.5 m . Now the section provided is 250 mm thick on side and bottom/top. The Ast required as per moment requirement considering IRC loading is coming less but provided steel
of 150 mm c/c is approx double of Ast required. Could you please explain the governing factor for such high quantity of provided steel. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|
|
|